Productos

Breather Valve - Twin Cam

Caracteristicas: Solves the problem of oil carryover in Twin Cam "A" motors with stock oil pumpOi...

Caracteristicas: Solves the problem of oil carryover in Twin Cam "A" motors with stock oil pumpOil carryover is oil that comes out of your breather and all over your bikeEasy-to-install when changing cams or servicing the oil pumpMade in the U.S.A.Not for use with Feuling oil pumps.Peso: 0.45 Alto: 3.2 Largo: 6.14 Ancho: 3.25 Aditamentos:Electra Glide Classic EFI FLHTCI : 2003-2004-2006-2005Electra Glide Ultra Classic EFI FLHTCUI : 2005-2006-2004-2003Super Glide Custom FXDC : 2005Super Glide ...

Breather Washer - 3/8"

Caracteristicas: Replacement ComponentsPeso: 0.03 Alto: 0.27 Largo: 4.17 Ancho: 1.96 Aditamentos:...

Caracteristicas: Replacement ComponentsPeso: 0.03 Alto: 0.27 Largo: 4.17 Ancho: 1.96 Aditamentos:Specs:Material: Silicone-Coated SteelMounting Flange/Inside Diameter: 9.50 mmProduct Name: Breather Screw Seal WasherBase Color: BlackMounting Flange/Inside Diameter: 0.37"Units: 10 PackMounting Flange/Inside Diameter: 9,50 mm (0,37")Riding Style: StreetColor/Finish: Black

Cam - 450 Series - Big Twin

Caracteristicas: S&S cams are tested on the dyno, street and racetrack before being offered t...

Caracteristicas: S&S cams are tested on the dyno, street and racetrack before being offered to the publicWith hundreds of test hours on them, you know that you are getting the best cam S&S can produceGood low and mid-range torqueBolt-in cam for lower compression motors with compression up to 8.5:1Recommend solid liftersMade in the U.S.A.Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.Peso: 1.75 Alto: 3.3 Largo: 6.2 Anc...

Cam - 450 Series - Big Twin

Caracteristicas: S&S cams are tested on the dyno, street and racetrack before being offered t...

Caracteristicas: S&S cams are tested on the dyno, street and racetrack before being offered to the publicWith hundreds of test hours on them, you know that you are getting the best cam S&S can produceGood low and mid-range torqueBolt-in cam for lower compression motors with compression up to 8.5:1Recommend solid liftersMade in the U.S.A.Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.Peso: 1.98 Alto: 3.22 Largo: 6.14 A...