S&S CYCLE

Replacement Rings

Caracteristicas: Replacement ring set for S&S PistonsPeso: 0.2 Alto: 0.7 Largo: 4.7 Ancho: 4....

Caracteristicas: Replacement ring set for S&S PistonsPeso: 0.2 Alto: 0.7 Largo: 4.7 Ancho: 4.2 Aditamentos:Specs:Riding Style: StreetPiston Size: +0.010"Bore Size: 3.875"Product Name: Piston RingUnits: Set

Piston Kit - Twin Cam

Caracteristicas: All piston kits come with two pistons, rings, wrist pins, and wrist pin keepersC...

Caracteristicas: All piston kits come with two pistons, rings, wrist pins, and wrist pin keepersCompression ratios listed are approximate and are calculated using the correct length cylinders as specified by S&SRequire the use of connecting rods with a rod length of 7.440"; Use of earlier connecting rods with a rod length of 7.470" will result in a slight increase in the compression ratio of about 1/2 point, and may also result in clearance problems (check all piston to cylinder head clea...

560S Cam - Big Twin

Caracteristicas: S&S cams are tested on the dyno, street and racetrack before being offered t...

Caracteristicas: S&S cams are tested on the dyno, street and racetrack before being offered to the publicWith hundreds of test hours on them, you know that you are getting the best cam S&S can produceBest response from 3500 rpm and upFor 10:1 and higher compression motorsRecommend high-performance hydraulic or solid liftersInstaller must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.Made in the U.S.A.Peso: 1.7 Alto: 3.18 Largo: 6.1...

Master Flywheel Balance Kit

Caracteristicas: Includes a platform scale, two 500g balance weights and a 1,000g balance weight;...

Caracteristicas: Includes a platform scale, two 500g balance weights and a 1,000g balance weight; one balance shaft, one balance shaft nut, one balance stand and one rod support stand; taper adapters for 84-85 Big Twin, a drive-side shaft adapter for 86-99 XL, and cam-side shaft adapters for 84-99 Big Twin; drive-side shaft adapter for 84-99 Big Twin, shaft adapter counterweight, drive-side collar spacers for 86-99 XL and a 1,000g bob weight assemblyWorks with OEM, S&S and any other flywh...